ENERGY-O Generatori aria calda basamento Tecnoclima

Keypoints

Ideal in case of limited height of the room as well as for raised or suspended installation to avoid obstructions on the floor
Maximum energy efficiency and environmental comfort thanks to power modulation and condensation operation at reduced thermal load
Heat exchanger made entirely of stainless steel AISI 304 with aerodynamic profile and turbulent imprints
High efficiency ~ 103%
Can be combined with gas or diesel blown air burners, with two-stage or modulating operation
8 models with thermal capacity from 20 kW to 1.100 kW and air flow from 4.600 to 71.000 m3/h
Suitable for ducted or direct diffusion systems with air outlet plenum

ENERGY-O Condensing horizontal warm air heaters for inside installation

Type

Hot

Supply

Gas
Oil

Thermal
power

from 23,0
to 1.090,0

Air flow

from 4.600
to 71.000

Tecnoclima cabinet warm air heaters ENERGY-O are the ideal solution for heating and controlled ventilation of medium large areas such as workshops, laboratories, industrial halls, warehouses, gyms, shopping centers, exhibition halls, theaters, churches, etc.

Product informations

Description

External casing in pre-painted or powder-coated galvanized steel with insulation.

Heat exchanger three smokes rounds, with combustion chamber made of AISI 430 stainless steel, smoke pipes in AISI 304 stainless steel including turbolators, exhaust manifold with condensate discharge, inspection doors, chimney connection and burner mounting plate with insulation.

Fan section with one or more high performance centrifugal fans, complete with electric motor and variable belt transmission.

Electrical board for control and protection of the warm air heater designed for three phase electrical motor supply 400V 50Hz 3N, complete with FAN-LIMIT double thermostat (n°1 with manual reset and n°1 with automatic reset).

Technical features

Description	U.M.	ENERGY 60 O	ENERGY 105 O	ENERGY 160 O	ENERGY 220 O
Max nominal heating capacity input (burned)	kW	68,2	115,1	175,7	246,1
Max nominal heating capacity input (burned)	kcal/h	58.650	98.986	151.105	211.650
Max USEFUL heating capacity output	kW	60,1	103,5	160,3	217,1
Max USEFUL heating capacity output	kcal/h	51.686	89.010	137.858	186.706
Nominal air flow	Nm³/h	4.600	8.000	11.000	15.000
Useful static pressure	Pa	220	220	220	220

Description	U.M.	ENERGY 320 O	ENERGY 460 O	ENERGY 640 O	ENERGY 970 O
Max nominal heating capacity input (burned)	kW	349,8	502,9	715,2	1.089,8
Max nominal heating capacity input (burned)	kcal/h	300.830	432.495	615.045	937.230
Max USEFUL heating capacity output	kW	323,9	465,2	648,6	970,0
Max USEFUL heating capacity output	kcal/h	278.554	400.072	557.796	834.200
Nominal air flow	Nm³/h	21.500	31.000	43.000	71.000
Useful static pressure	Pa	220	220	220	220

Dimensions

Model	Dimensions mm					Chimney Ø mm	Weight kg	Weight (with package) kg
Model	A	A1	B	C	E	Chimney Ø mm	Weight kg	Weight (with package) kg
ENERGY 60 O	1.580	–	870	675	-	150	180	200
ENERGY 105 O	1.926	–	1.060	900	-	200	320	340
ENERGY 160 O	2.120	–	1.300	1.045	100	250	480	505
ENERGY 220 O	2.550	–	1.500	1.145	100	250	600	625
ENERGY 320 O	2.750	–	1.700	1.350	100	300	800	830
ENERGY 460 O	1.400	1.870	2.090	1.430	100	300	1.250	1.285
ENERGY 640 O	1.400	2.120	2.500	1.670	100	350	1.800	1.840
ENERGY 970 O	1.600	2.120	3.500	1.680	100	400	2.200	2.245

Supply description

CONDENSING WARM AIR HEATER consisting of:

Heat exchanger three smokes rounds, with combustion chamber made of AISI 430 stainless steel, smoke pipes in AISI 304 stainless steel including turbolators, exhaust manifold with condensate discharge, inspection doors, chimney connection and burner mounting plate with insulation.
External casing in pre-painted or powder-coated galvanized steel with insulation.
Support frame in galvanized steel, inclined toward the condesate drain.
Fan section with one or more high performance centrifugal fans, complete with electric motor and variable belt transmission.
Electrical board for control and protection of the warm air heater designed for three phase electrical motor supply 400V 50Hz 3N, complete with FAN-LIMIT double thermostat (n° 1 with manual reset and n° 1 with automatic reset).
Air inlet section open on two sides (upper and side). Closing panels have to be selected from the list of accessories by the customer depending on the air inlet position.

PACKAGE: Warm air heaters are wrapped in plastic film.

Accessories

ENERGY-O - Tecnoclima spa

Top panel
Side panel
Safety top grid for air intake
Safety side grid for air intake
Top air inlet filter
Side air inlet filter

1. Top panel for air inlet section to be ordered together with the heater according to the chosen inlet air position.

2. Side panel for air inlet section to be ordered together with the heater according to the chosen inlet air position.

Safety top grid for air intake - Tecnoclima spa

3. Safety top grid for air intake top and side, for air inlet section to be ordered together with the heater according to the chosen inlet air position.

Safety side grid for air intake - Tecnoclima spa

4. Safety side grid for air intake for air inlet section to be ordered together with the heater according to the chosen inlet air position.

5. Top air inlet filter complete with metallic cabinet, with replaceable and regenerable filter elements, safety pressure switch for burner stopping when filter elements are obstructed (excluded for ENERGY-O 60 and ENERGY-O 105 models).

6. Side air inlet filter complete with metallic cabinet, with replaceable and regenerable filter elements, safety pressure switch for burner stopping when filter elements are obstructed (excluded for ENERGY-O 60 and ENERGY-O 105 models).