Keypoints
- Heating capacity 175 kW
- Installation inside the area to be heated
- Suitable for ducted systems
- Gas or oil-fired
Warm Air Heaters
AGRI-DF High efficiency agricultural warm air heaters down flow
with downwards air outletOil
AGRI-DF warm air heater was designed as the answer to the growing need of farmers to heat greenhouses with "down-flow" air diffusion system. A widespread diffusion of warm air at the base of the plants ensures healthy, faster and more intense growth. The warm air heating system allows intermittent operation (only when needed during the coldest hours of the day) and occasional use (only in the cold months of the year), it guarantees also a significant reduction in investment costs and a sure operation saving.
Product informations
AGRI-DF heats with clean air, avoiding the emission of harmful combustion residues and also reduces excess humidity in the room. The use of clean air and the reduction in humidity make it possible to limit ventilation requirements with clear advantages in terms of energy savings and quality of the growing environment for crops.
The AGRI-DF heater uses state-of-the-art technical solutions, components and materials, designed to achieve the best heating-ventilation performance and selected to ensure reliable operation over the years.
The heat exchanger is made entirely of corrosion-resistant AISI 430 stainless steel, and the combination with blown burners (gas or oil) allows reliable and safe operation even in harsh environments. The ventilation unit consists of a special helical electric fan, characterized by high available pressure and quiet operation.
AGRI-DF significantly improves plant growth by ensuring the necessary amount of heat, at the most suitable temperature in relation to the plant's life cycle.
Description |
U.M. |
Model |
---|---|---|
AGRI 175 DF |
||
Nominal heating capacity input (burned) |
kW |
175,0 |
kcal/h |
150.500 |
|
USEFUL heating capacity output |
kW |
152,3 |
kcal/h |
130.970 |
|
Nominal air flow |
Nm3/h |
12.500 |
Useful static pressure |
Pa |
110 |
Electrical supply 50Hz |
400V/3N |
NOTE: On request models with more heating capacity are available.
WARM AIR HEATER consisting of:
- Heat exchanger with three smokes rounds, completely made of stainless steel AISI 430, complete with an inspection door, chimney connection and burner mounting plate.
- External casing in pre-painted galvanized steel with radiation-proof insulation made of metallic internal panels and air.
- Support frame
- Fan section with one axial fan complete with three-phase electric motor 400V 50Hz 3N and safty grid.
- Electrical board for control and protection, complete with sealed electrical board and n°2 FAN-LIMIT double thermostats.
- Bottom air outlet plenum with two circular fittings of Ø 500 mm for the connection to the on-ground warm air distribution system.
- For oil burner version: single stage forced draught oil burner complete with electric device, nozzle and flexible pipes.
- For gas burner version: single stage forced draught gas burner complete with electric device and gas train. In the version with gas burner the heater is supplied with an additional safety thermostat (with manual reset).
NOTES:
• The gas trains for burners are designed to work with normal supply pressure (20 mbar for natural gas and 30 mbar for LPG).
• The burners are supplied equipped with safety/control devices and usual supply accessories foreseen by the supplier.
DELIVERY: Ex works our factory.
PACKAGE: Warm air heaters are wrapped in cardboard and pallet-loaded. Accessories are protected in cardboard or plastic film.
1. Hot air supply connections.
2. Combustion chamber.
3. Heat exchanger.
4. Rear flue gas collector.
5. Chimney connection.
6. Rear smoke collector inspection door.
7. Blown burner.
8. Flame sight glass.
9. Electrical panel.
10. FAN-LIMIT dual thermostat.
11. Helical electric fan.
-
Metal main duct Ø 500 mm per meter
-
Closing lid for main duct Ø 500 mm
-
Circular fitting Ø 300 mm for connection of the secondary sleeve to the main duct
-
Fixing clamp for secondary sleeve
-
Polyethylene secondary sleeve Ø 300 mm non perforated, per meter
-
90° stainless steel elbow
-
Stainless steel exhaust pipe L=1,0 m
-
Stainless steel rain cap
-
T terminal
-
Chimney support bracket
-
Cover crossing set
-
Sealed room thermostat with digital display
-
Sealed room thermostat, with spiral sensor
-
Heater adjustment for operation with gas
(To be ordered simultaneously with the heater) -
System of enrichment with carbon dioxide
-
Snorkel connection for oil burner
-
Snorkel connection for gas burner
APPLICATION EXAMPLE FOR GREENHOUSES
MULTITUNNEL GREENOUSE DATA
Dimensions of the span: 9,6 x 115 x 3,5 (6,0) m
Number of spans: 9
Area: 10.000 m2
Temperature difference internal/external: 20 K
Cover material: Walls and roof made of simple plastic film
Heating capacity required: 2400 kW
SOLUTION
Heater model: AGRI 175 DF
Number of heaters: 18
Total heating capacity output: 2741 kW
Total nominal air flow: 225.000 Nm3/h