CMX Generatori d’aria calda pensili Tecnoclima

Warm Air Heaters

CMX Condensing suspended gas-fired room sealed heaters

for duct systems with premix modulating gas burner

Type

Hot

Supply

Gas

Thermal
power

from 29,0
to 116,0

Air flow

from 3.200
to 13.000

CMX - air treatment units for indoor or outdoor installation (using a special kit). Premix condensing units with centrifugal fan and the possibility of treating and mixing both outdoor air and air returning from the environment.

Product informations

Description

Condensing sealed warm air heaters with modulating premix gas burner, CMX range, are designed to be installed inside the building or outside (with a special kit) and allowing diffusion of the air by ducted systems. The CMX heaters are equipped with centrifugal fans with energy efficient motors to ensure the air pressure necessary for distribution through air ducts and diffusers. The unit operates with variable thermal power with continuous modulation, fully automatically regulated from the remote control panel with integrated or remote environment temperature probe. The warm air heaters, thanks to the continuous modulation of the thermal capacity, decreases automatically the heating power, reaching performance values of up to 106%, consuming less fuel and ensuring ideal comfort and significant overall operating economy.
The CMX warm air heaters finds application in the heating of industrial and commercial environments, facilities for sports, entertainment, etc.

Tecnoclima premix gas suspended warm air heaters have many advantages:

heat capacity of the premix burner has a wide modulation range: from 100 % to 30 % of the nominal heat capacity;
thanks to the modulation of the thermal capacity, as the demand for heat from the environment decreases, very high e ciency values are reached, up to 106%, with many benefi ts in terms of environmental comfort and the reduction of gas consumption;
the premix burner allows perfect mixing of the gas with the combustion air obtaining a semi-radiant fl ame band with very low emissions of nitrogen oxides, NOx: Class 5 of emissions;
very high thermal effi ciency and progressive modulation of the thermal power contribute to obtain operating cost savings of over 30 % compared to traditional systems.

Technical features

Description	U.M.	CMX 30	CMX 40	CMX 50
Max nominal heating capacity input (burned)	kW	29,1	38,5	49,8
Max nominal heating capacity input (burned)	kcal/h	25.057	33.111	42.822
Max USEFUL heating capacity output	kW	28,0	37,0	48,0
Max USEFUL heating capacity output	kcal/h	24.080	31.820	41.280
Min USEFUL heating capacity output	kW	10,0	14,0	19,0
Min USEFUL heating capacity output	kcal/h	8.600	12.040	16.340
Nominal air flow	Nm³/h	3.200	4.400	5.500
Useful static pressure	Pa	200/450	200/450	200/450

Description	U.M.	CMX 60	CMX 90	CMX 120
Max nominal heating capacity input (burned)	kW	59,0	90,8	116,0
Max nominal heating capacity input (burned)	kcal/h	50.745	78.102	99.760
Max USEFUL heating capacity output	kW	57,0	89,0	115,0
Max USEFUL heating capacity output	kcal/h	49.020	76.540	98.900
Min USEFUL heating capacity output	kW	21,0	35,0	43,0
Min USEFUL heating capacity output	kcal/h	18.060	30.100	36.980
Nominal air flow	Nm³/h	6.500	10.000	13.000
Useful static pressure	Pa	200/450	200/450	NOTES200/450

NOTES:
The warm air heaters CMX are designed for indoor installation. Kit for outdoor installation available as accessory.
The warm air heaters CMX are set to G20 natural gas. The conversion kit to natural gas G25 (where applicable) or propane gas G31 can be ordered separately (see accessories).
The remote control panel is a mandatory accessory for correct operation of the heaters.

Dimensions

Model		Dimensions mm			Chimney Ø mm	Air connection Ø mm	Weight kg	Weight (with package) kg
Model		A	B	C	Chimney Ø mm	Air connection Ø mm	Weight kg	Weight (with package) kg
CMX	30	979	1300	778	80	80	117	139
CMX	40	979	1300	778	80	80	120	145
CMX	50	1319	1450	848	80	80	162	192
CMX	60	1319	1450	848	80	80	170	205
CMX	90	1869	1650	998	100	100	295	337
CMX	120	1869	1650	998	100	100	312	357

Supply description

CONDENSING WARM AIR HEATER consisting of:

Heat exchanger with combustion chamber made of AISI 430 stainless steel, with smoke pipes made of AISI 304 stainless steel with turbulence imprints, complete with inspection door, chimney connection and condensate discharge connection
External casing made of pre-painted or powder-coated galvanized steel, with thermal insulation.
Premix modulating burner with low CO and NOx emissions (Class 5), with wide regulation range, including semi-radiant flame tubular, modulating mixer and gas-air solenoid valve, DC brushless fan, ignition and ionisation electrodes for flame control.
Centrifugal fan complete with electrical motor and variable belt transmission. 400V 50Hz 3N power supply.
Air inlet plenum containing the fan group, complete with safety grid and designed for the possible connection of an air intake duct.
Multifunctional electronic board for control and protection of the warm air heater: ambient temperature control, burner start up, flame supervision and safety functions.
Multifunctional LED indicator to signal operating conditions or the presence of the main anomalies.
Safety temperature probe for overheating shutdown.
Air outlet flange for connection of the air outlet duct.
Combustion air intake connection.
Flue exhaust connector complete with a sampling well for combustion products.
Siphon for the condensate discharge.

PACKAGE: Warm air heaters are packed in cardboard and pallet-loaded.

Accessories

Remote control panel complete with programmable thermostat and integrated ambient temperature probe, to manage the operating parameters, display diagnostic messages and reset the heater if necessary. Each remote control panel can manage up to 10 units.