Keypoints
MANCANO KEYPOINTS
Warm Air Heaters
EKOCIKKI 80 High efficiency indirect-fired warm air heaters
for poultryto 6.500
EKOCIKKI series responds to the growing breeders need to have air heating systems with clean air. The innovative model EKOCIKKI 80 is an excellent alternative to direct-fired gas heaters that were traditionally used until today on poultry farms. Thanks to the heat exchanger technology of EKOCIKKI 80, emissions of CO2, CO and NOx are totally excluded from warm air supplied to the environment, providing healthy conditions for poultry growth and decreasing necessity in ventilation.
Product informations
Warm air heater EKOCIKKI 80 includes special innovative and internationally patented heat exchanger that permits to keep compact dimensions of the heater, reaching very high thermal efficiency. The combustion chamber and the heat exchanger are completely made of stainless steel inox AISI 430.
Warm air heater EKOCIKKI 80 supplies warm air directly into the environment without air ducts. It can be configured for outside or inside installation and allows to use fresh or internal return air as well as to mix the necessary amount of them. Thanks to the pre-painted stainless steel external case with IP 44 protection degree, EKOCIKKI 80 is resistant to any weather conditions and can be installed outdoors without additional protection, saving precious space inside the farm for poultry breeding.
EKOCIKKI 80 is equipped with the atmospheric burner and provides high efficiency working with natural gas, propane or butane. The flame is completely inside the combustion chamber made of materials resistant to thermal loads and corrosion.
Thanks to clean warm air supplied by EKOCIKKI 80 and descreased humidity level in the environment, less ventilation and lower air exchange rate are required, ensuring important advantages in terms of energy savings and the quality of the environment for healthy birds growth.
Description |
U.M. |
Model |
---|---|---|
EKOCIKKI 80 |
||
Nominal heating capacity input (burned) |
kW |
77,3 |
kcal/h |
66.520 |
|
USEFUL heating capacity output |
kW |
70,0 |
kcal/h |
60.200 |
|
Nominal air flow |
Nm3/h |
6.500 |
WARM AIR HEATER EKOCIKKI 80 consisting of:
- Heat exchanger, completely made of stainless steel, complete with an inspection door and chimney connection.
- External casing in pre-painted galvanized steel with thermal insulation provided by means of aluminized steel internal panels and glass wool.
- Fan section with one axial fan complete with a single-phase 230V 50Hz 1N electric motor and safety grid.
- Control and safety equipment, including multi-function electronic board, FAN-LIMIT triple-thermostat, differential pressure switch and light alerts group.
- Switch for selection of operating mode Heating-Stop-Summer ventilation.
- Multigas atmospheric burner group with two stainless steel tubes with ignition and flame control electrodes.
- Centrifugal smoke extraction fan.
NOTES:
• EKOCIKKI 80 heaters are equipped for LPG operation (propane gas G31). The kit for the transformation to methane gas G20 and methane gas G25 is supplied on request.
DELIVERY: Ex works our factory.
PACKAGE: Warm air heaters are wrapped in cardboard and pallet-loaded. Accessories are protected in cardboard or plastic film.
-
Set of adjustable supports
-
Supply air duct with adjustable fins L=500 mm
-
Supply air duct with adjustable fins L=750 mm
-
Intake air duct with protection grid L=400 mm
-
Intake air duct with protection grid L=750 mm
-
Electronic room thermostat
-
Sealed room thermostat
-
90° elbow Ø100
-
Pipe L=1000 mm Ø100
-
Rain cap Ø100
-
Conversion kit to natural gas G20
-
Conversion kit to natural gas G25
BROILER HOUSE DATA
Dimensions: 120 x 14 x 3 (3,5) m
Number of chickens: 30.000
Temperature difference internal/external: 40 K
House insulation: Reasonable/good insulation
Heating capacity required: 280 kW